If you own an EZGO golf cart and use the Powerwise charger, then you may have experienced issues with it not working properly. This can be a frustrating problem to deal with, but don’t worry, we are here to help! In this article, we will answer some common questions about the Powerwise charger and provide tips on how to troubleshoot it if it is not working correctly.
Table of Contents
When It Makes Sense To Replace
If your charger is more than 10 years old, it may be time to replace the entire unit. Over time, the components in the charger can degrade and cause problems. Also, if you have tried all of the troubleshooting tips below and your charger still isn’t working properly, then it is likely that you need a new one. [1]
Fixing the Ezgo Powerwise Charger
If you have an electric golf cart, then you know how important it is to keep the battery charged. After all, if the battery dies, then so does the golf cart. That’s why it’s important to know how to troubleshoot the EZGO Powerwise charger not working.
The EZGO Powerwise charger is a great way to keep your golf cart battery charged. However, like all chargers, it can occasionally have issues. The good news is that most of these issues are easy to fix.
Dead carts
Empty carts are the worst. If you have an EZGO golf cart, you know that the Powerwise charger is essential to keeping your battery topped off and your cart running. But what do you do when your EZGO Powerwise charger stops working? If your Powerwise charger is not working, follow these steps to fix the issue. Common reasons why your Powerwise charger might not be working, and how you can fix it. First, check the fuse on the charger. If the fuse is blown, replace it with a new one and see if that fixes the issue.
If not, check the power cord for any frayed or damaged wires. If you find any, replace the cord. If neither of those solutions solves the problem, it’s time to call a technician. An experienced technician will be able to diagnose and fix the problem quickly and efficiently.
Circuit problems
The first thing you should do if your EZGO Powerwise charger isn’t working is to check the circuit breaker. The circuit breaker is located on the side of the charger, and it may have tripped.
Try charging the battery with a different charger to see if it will charge. If the battery charges with a different charger, the problem is likely with the EZGO Powerwise charger. If the battery doesn’t charge with a different charger, the problem is likely with the battery itself and it will need to be replaced.
Charge circuit
The first thing you want to check is the charge circuit breaker. The breaker is a safety device that trips if there is an overload on the electrical system, and it may have tripped due to a power surge or other problem. To reset the breaker, simply flip the switch to the “Off” position and then back to the “On” position. If the breaker trips again, there may be a problem with the charger itself or with the golf cart’s electrical system.
Further checks
If the charger is still not working after following the above steps, there are a few further checks you can do:
- Check that the batteries are connected properly and that there is no corrosion on the terminals;
- If you have multiple batteries, check that they are all of the same type and voltage;
- Check the charger’s AC cord for any damage;
- If you are using an extension cord, make sure that it is rated for at least 15 amps and is no longer than 50 feet;
- See if the circuit breaker has tripped or the fuse has blown by checking the circuit breaker or fuse box;
- If you need additional assistance, please do not hesitate to reach out to EZGO customer service [2] ;
Find a neighbor
Find a neighbor or friend with a working charger If you have a golf cart that uses the EZGO Powerwise charger and it’s not working, your first step is to find someone with a working charger. This test will help you distinguish if the difficulty is coming from the charger or the golf cart battery. If you think your charger is the issue, there are a few steps you can take to solve the problem.
Corrosion and wear
Corrosion and wear can damage the electrical contacts on your EZGO Powerwise charger, preventing it from working properly. If your charger isn’t working, follow these steps to troubleshoot the problem:
- Check the condition of the charging port and contacts. If there is any corrosion or debris present, clean the area with a cotton swab dipped in rubbing alcohol;
- Inspect the charging cord for signs of wear or damage. If the cord is damaged, replace it with a new one;
- Check the power source (outlet or extension cord) to make sure it’s working properly;
- Make sure the circuit breaker is turned on and reset if necessary;
If you’ve followed these steps and your EZGO Powerwise charger still isn’t working, contact customer service for assistance. If you have an EZGO Powerwise charger that’s not working, don’t despair! Troubleshooting the problem is often a simple matter of cleaning off corrosion or debris, inspecting for damage, or resetting the circuit breaker. A small amount of time and effort is all you need to get your charger working again.
Protecting your charger
Investing in a good quality charger is important, but it’s also important to take care of your charger so that it lasts. Here are some tips on how to do this:
- Keep your charger clean and free of debris. A build-up of dirt and grime can cause your charger to work less efficiently or even stop working altogether. If you live in an area with a lot of dust, make sure to clean your charger more often;
- Avoid exposing your charger to extreme temperatures. This can damage the internal components and shorten the lifespan of your charger;
- Be careful not to drop or bang your charger around. This can also damage internal components;
Circuit Control Board
The circuit control board is the “brain” of the EZGO Powerwise charger. It controls all charging functions and monitors battery conditions. If the charger will not turn on, or if it turns off unexpectedly, the circuit board may be damaged and need to be replaced.
Transformers
When To Buy A New One?
Although your EZGO Powerwise charger may have served you well for the past 10 years, it might be time to replace it if it’s starting to break down. Depending on how often you use your golf cart, a new charger could last you several years.
The EZGO Powerwise charger is an essential part of keeping your golf cart running. If it stops working, it can be a frustrating experience.[4]
FAQ
How do you test a Powerwise golf cart charger?
There are a few ways that you can test your Powerwise golf cart charger to see if it is working properly. The first way is to use a multimeter to test the output of the charger. You should see a reading of around 36 volts when the charger is plugged in and working properly. Another way to test the charger is to plug it into the golf cart and see if the battery charging light comes on.
The light on the charger will come on if it is functioning properly. If your golf cart has a built-in charge meter, you can also use this to test the charger. The charge meter should show that the batteries are charging when the charger is plugged in and working properly.
Why is my EZ Go charger not working?
It could be any number of reasons. Check the fuse first, and if that’s not it, then there might be a problem with the battery, the charger itself, or the wiring. Troubleshooting an EZGO Powerwise charger can be tricky, but we’re here to help. In this article, we’ll go over the most common reasons why your charger might not be working, and how you can fix them.
How do I know if my EZ Go golf cart charger is bad?
The easiest way to tell if your EZ Go golf cart charger is bad is by testing the voltage output with a voltmeter. Most chargers will have an LED light that changes color to indicate when they are done charging, but this isn’t always reliable. If the voltage output is low or nonexistent, then you likely have a bad charger.
There are a few other signs that your charger may be failing, such as:
- The charging light stays on or flashes constantly;
- The golf cart takes a long time to charge;
- The golf cart doesn’t hold a charge for very long;
If you’re experiencing any of these issues, then it’s time to troubleshoot your charger.
Why is my golf cart charger not working?
A number of things could keep your EZGO golf cart charger from working. This article discusses the primary reasons a charger might stop working, as well as how to repair those problems.
Is there a fuse in a golf cart charger?
If your EZGO charger is not working, the first thing you should check is the fuse. The EZGO golf cart charger has a fuse in it to protect against power surges. If the fuse is blown, then the charger will not work. You can find the fuse on the back of the charger near the power cord.
How do you reset a golf cart charger?
If your EZGO Powerwise charger is not working, the first thing you’ll want to do is reset it. To do this, simply unplug the charger from the outlet and plug it back in. This will often reset the charger and get it working again.
How do I test a battery charger with a multimeter?
To test your battery charger with a multimeter, first, make sure that the charger is unplugged from the power outlet. Then, set your multimeter to the volts setting and touch the red lead to the positive terminal on the battery and the black lead to the negative terminal. You should see a reading of around 12-14 volts.
If the readings are not in this range, then there is something wrong with your battery charger.
Can a golf cart charger be repaired?
In most cases, yes. However, it is important to consult with a qualified golf cart repair technician to ensure that the charger is properly repaired and that any safety concerns are addressed.
How does the EZ GO battery charger work?
The EZ GO charger is a device that charges the batteries in your golf cart. It is important to keep the batteries in your golf cart charged so that you can use it for a long time. There are two types of EZ GO chargers: the AC charger and the DC charger. The AC charger plugs into a standard outlet and the DC charger plugs into the cigarette lighter port in your golf cart. The EZ GO charger has a light that indicates when the charger is working. The light will be green when the charger is charging the batteries and red when the batteries are fully charged. If the light is not on or is blinking, then there may be something wrong with the charger.
Useful Video: Charger repair. How to troubleshoot an Ezgo Power wise charger
Conclusion
If your EZ GO charger is broken, defective, or not powered on, there are a few steps you can take to fix the problem. To begin, ensure that the charger is plugged in correctly. Second, check the fuse on the charger. If the fuse is blown, then replace it with a new one. Finally, if the charger still does not work, then you may need to replace it with a new one.
References:
- https://diygolfcart.com/blog/powerwise-charger-board-and-diagnostic-how-to-repair-or-replace-golf-cart-charger/
- https://www.petesgolfcarts.com/battery-charger-knowledge/ezgo-powerwise-charger-repair-or-replacement/
- https://support.performancepluscarts.com/hc/en-us/articles/360036087453-EZGO-Powerwise-Charger-Not-Coming-On
- https://www.rmigolfcarts.com/blogs/news/7414158-how-to-repair-an-ez-go-powerwise-golfcart-charger
