Do you have a golf club that you just can’t seem to get the right lie angle on? Maybe it feels like the ball keeps coming off the ground too early or too late. If this sounds like you, don’t worry – you’re not alone. A lot of people have trouble with their club’s lie angle, but there is an easy solution: bending the club.
Golf clubs with an incorrect lie angle can’t be used by any player. If the lie angle of the golf club isn’t appropriate, the shot will not be successful. In this instance, the golfer must adjust the lie angle of the golf club as soon as possible to improve accuracy.
New players and infrequent golfers, on the other hand, are frequently guilty of making some errors when bending the proper angle. Keeping a clear picture of how to bend golf clubs at home may be beneficial. Even novice gamers can manage it on their own.
Since golfers make numerous swings, they must alter the lie angle frequently. However, bending the lie angle is somewhat difficult and needs a little investment.
In this blog post, we will teach you how to bend a golf club’s lie angle at home so that you can improve your game!
What Is a Lie Angle?
The angle between the shaft and court is known as the heel-to-toe or forehand-backhand. The measurer’s measuring stick should rest against the ground where the center of the sole comes into touch with it when standing over a net.
The putters’ range will span from 59 to 64 degrees .
There are three angles to consider when making modifications:
- Standard Lie Angle. The standard lie angle is the one that comes with the club when you buy it. The factory will have determined this based on an average height and build;
- Flat Lie Angle. A flat lie angle means that the clubface will be more horizontal to the ground at impact. This is good for golfers who tend to hit down on the ball, as it will encourage a shallower angle of attack;
- Sloping/Vertical Lie Angle. A sloping lie angle means that the clubface will be more vertical to the ground at impact. This is good for golfers who tend to hit upon the ball, as it will encourage a steeper angle of attack;
Advantages Of Bending A Lie Angle At Your Home
There are a few advantages of bending a lie angle at your home.
The main advantage is that it can save you money. Bending a club’s lie angle is not an expensive proposition, but if you were to take your clubs to a professional club fitter, the cost would be much higher.
When you bend lie angles at a professional fitting, the fitter generally has a set procedure that they follow. This can lead to inconsistencies in the results. By doing it yourself, you can ensure that each club is bent exactly to your specifications.
Finally, bending lie angles at home can be a fun and rewarding experience. It’s a great way to get more involved in the game of golf and to really customize your clubs to your own swing. If you take the time to do it right, you can end up with a set of clubs that perform better than anything you could buy off the rack.
How Much Does It Cost To Bend A Lie Angle Of A Golf Club?
It should take no more than five dollars to alter a golf club’s lie angle. Each club is billed $10 per month.
If you’re having a lie angle adjustment, be sure to inquire whether the shop will charge you for the set of irons or each club individually .
You may save a few bucks by doing the work yourself. But, unless you’re experienced in this type of adjustment, you could do more harm than good to your clubs. It’s best to leave it to the experts.
How to Bend Golf Club Lie Angle at Home:
There are a few ways that you can modify the lie angle of your clubs at home:
Using a Club Bending Machine
If you want to be able to make precise adjustments to the lie angle of your clubs, then using a club bending machine is the best way to go.
First, you’ll need to find a club-making professional who has a club bending machine. Once you’ve found someone with a machine, take your club and mark where you want the bend to be with some tape.
Then, simply put the club into the machine and let the machine do its job. The great thing about using a club bending machine is that you can make very precise adjustments to the lie angle of your clubs.
Using a Heat Gun
If you don’t have access to a club bending machine, then another way that you can modify the lie angle of your clubs at home is by using a heat gun.
First, you’ll need to find a spot where you can clamp your club down so it doesn’t move around while you’re working on it. Then, take your heat gun and hold it about six inches away from the club.
Slowly move the heat gun back and forth over the area where you want to bend the club. Be careful not to hold the heat gun in one spot for too long, as this can damage the club.
After a few minutes of heating up the area, you should be able to bend the club to the desired lie angle.
If you don’t have access to a heat gun, then another way that you can modify the lie angle of your clubs at home is by using pliers.
First, you’ll need to find a spot where you can clamp your club down so it doesn’t move around while you’re working on it. Then, take your pliers and grip them around the area where you want to bend the club.
Slowly apply pressure to the club until you’ve reached the desired lie angle.
No matter which method you choose, be sure to take your time and make small adjustments until you get the perfect lie angle for your clubs. Remember, it’s all about trial and error! And once you get the hang of it, bending clubs at home will be a breeze.
Why Is a Change in Lie Angle Cheaper than Shortening My Golf Clubs?
If you’re a golfer who constantly tinkers with the specifications of your clubs, you know that some modifications are more expensive than others. In fact, changing the lie angle on a golf club is one of the least expensive adjustments you can make to a club .
This is because the club does not require a new grip in order to alter its lie angle. Whenever you change the length of a club, you must remove the grip.
When you remove the grip from a club, the cost of the project will almost certainly rise. You can leave your grips on the clubs when you adjust their lie angle as long as they are in good shape. You will usually just have to pay for the golf club repair expert’s time to change your clubs’ angle.
Should I Change the Lie Angle of My Golf Club?
The lie angle of a golf club is the angle between the shaft and the ground when the club is sitting in its natural position. If you’re not sure what that position is, it’s simply how the club would rest if you were to hold it out in front of you at shoulder height with the grip end pointing down.
The vast majority of golfers will have clubs that are correctly fitted for their lie angle. However, there are some players who might benefit from changing the lie angle of their clubs .
Some golfers tend to hit shots that veer off to the toe-side of the clubface (a toe shot). This can be caused by several things, but one potential cause is having a lie angle that is too upright. By adjusting the lie angle to be flatter, you can encourage the clubface to remain squarer through impact, which should help reduce the number of toe shots you hit.
Conversely, some golfers tend to hit shots that veer off to the heel-side of the clubface (a heel shot). This can also be caused by several things, but one potential cause is having a lie angle that is too flat. By adjusting the lie angle to be more upright, you can encourage the clubface to remain squarer through impact, which should help reduce the number of heel shots you hit.
Does One Degree Lie Angle Make that Much Difference?
If you’re playing really well and hitting the golf ball how you want to, you don’t need to alter your lie angle. We highly recommend getting your lie angle corrected if you’re having trouble with a slice or a hook that won’t quit.These swing modifications will lead to undesirable habits and add a lot of effort later on.
If this describes your case, we strongly advise you to use a lie and loft machine to correct your golf club’s lie angle. This isn’t a difficult or costly task, and if it allows you to shoot lower scores, it will have been well worth the money spent .
Can you bend the lie angle on irons?
Yes, the lie angle on irons can be bent, but it is more difficult to do than with wood. The best way to bend the lie angle on iron is to use a club-making tool designed for the purpose.
Lie angles generally range from about two degrees upright for very short hitters (under five-foot-tall) to about four degrees flat for very long hitters (over six-foot-tall). Most golfers fall somewhere in between these two extremes.
The standard lie angle for men’s clubs is usually between 63 and 65 degrees; while women’s clubs have lie angles between 62 and 64 degrees. If you are unsure of your proper lie angle, visit a local golf shop or pro shop and they can measure your clubs .
Once you have your clubs’ lie angles measured, you can start to experiment with different lies to find what works best for you. If you hit the ground before the ball, try flattening the lie angle. If you are consistently hitting the ball fat or thin, try changing the lie angle by a degree or two. Remember, small changes can make a big difference in your game.
What is the lie angle of the golf club?
The lie angle is the angle between the shaft and the ground when the club is in position for a shot. It’s important because it affects how high or low your shots will fly. If the lie angle is too flat, your ball will tend to fly lower than normal. If the lie angle is too upright, your ball will tend to fly higher than normal.
Most golfers need clubs with lie angles that are somewhere in between these two extremes. That’s because most golfers swing on an upward arc, which means that their shots naturally have a bit of backspin. Backspin makes the ball fly higher than it would if there was no spin at all.
Can you bend a cast iron golf club?
The answer is yes, you can bend a cast iron golf club, but it will take some effort. You’ll need to heat the club up first and then use a hammer to bend it. Be careful not to overdo it, though, or you could ruin the club.
If you’re not comfortable doing this yourself, you can always take it to a professional golf club fitter and have them do it for you. They’ll have the tools and experience necessary to get the job done right .
Neither way, bending a golf club’s lie angle is something that can be done relatively easily if you know what you’re doing. So if your clubs are giving you trouble on the course, don’t hesitate to give this a try. It just might help you start hitting the ball straighter than ever before.
Does upright lie promote a draw?
The answer is both yes and no. It all depends on how you attack the ball. If you come in too steep, then you will hit it fat. If you come in too shallow, then you will hit it thin. The key is to find that happy medium where the clubface meets the ball at impact flush across the sweet spot. That’s what promotes a draw.
Now, if your lie angle is too upright, then it becomes more difficult to make solid contact across the sweet spot because the clubface will be angled more towards the ground at impact. This can cause you to mishit shots and produce a lot of inconsistency in your game.
On the other hand, if your lie angle is too flat, then the clubface will be angled more towards the sky at impact, which can cause you to hit shots thin. So, there is a sweet spot when it comes to the lie angle, and it’s important to find it if you want to improve your game.
One way to test a lie angle is by using a mirror. Set up a golf club in your living room or bedroom so that the sole of the club is resting on the floor and the butt end of the club is pointing up towards the ceiling. Then, take a look at yourself in the mirror and see where the clubface is pointing.
If it’s pointing too far down at the ground, then your lie angle is too upright.
If it’s pointing too far up at the ceiling, then your lie angle is too flat.
Try to find a happy medium where the clubface is pointing neither too high nor too low.
Another way to test your lie angle is by hitting some shots on the driving range. If you are consistently hitting fat shots, then your lie angle is probably too upright. If you are consistently hitting thin shots, then your lie angle is probably too flat. Again, try to find that happy medium where you are making solid contact across the sweet spot of the clubface.
What happens if my clubs are too upright?
If your clubs are too upright, the toe of your bat will be off the ground, and you’ll have a propensity to pull the ball (inset, top).
On a slope, if both your shots were correct and the heel was up, you’d likely be hitting pushes (inset, bottom). Starting with the face slightly off might lead to an exponential number of misses, so make sure your clubs are compatible .
How do you bend irons at home?
A club’s lie can be bent more than 2 degrees.
The lie of iron may be bent 3-4 degrees or more with no damage to the head if the hosel design and manufacturing processes allow it.
This is especially true of clubs equipped with long hosels .
Useful Video: BENDING GOLF CLUBS WITH A HAMMER??