Choose the Best High Launch Low Spin Driver Shaft
Customer’s Choice: the Best Rated High Launch Low Spin Driver Shafts
146 users answered this survey. Please help us improve this review!
Reasonably, golf players tend to perform at the highest level. Since this much depends on the driver shaft they pick, they should approach choosing it seriously taking into consideration their own needs. For instance, if you want to hit the ball further, a lightweight shaft with reduced stiffness. So that to hit the ball straighter, you would better prefer a heavier but stiffer shaft. A lower kick-point shaft is preferred to be used to hit the ball higher while a higher kick-point point shaft is more effective in hitting the ball lower. At the same time, all the aspects which may drive a golfer to pick a certain shaft should be analyzed carefully and in a balanced manner. This implies that if you want to increase the distance of your shot, for instance, it should not undermine accuracy. In case a golf player wants to get a more accurate trajectory, they should make sure that this will not affect the distance.
Paying specific attention to these factors, one can choose a driver shaft that will fully satisfy their playing needs. In the Comparison Table, we have provided the basic details on the TOP 5 Driver Shafts. These models are highly likely to meet any golf player’s expectations.
Table of Contents
Project X New HZRDUS Driver/Fairway Shaft – The Best For X-Stiffness!
The Project X Hzrdus driver shaft is low spinning and low launching. The shaft weighs 1.35 pounds and has the following dimensions: 7 x 5 x 48 inches. It is characterized by enhanced stiffness along the golfing shaft. This is what enables a golfer to maximize power behind a ball without losing control over it.
Grafalloy ProLaunch Stiff Shaft – The Best For The Convenience!
The length is standard but it can be accommodated to individual golfer’s needs. The Grafalloy ProLaunch shaft is delivered with a grip and an adapter as a set. It is TaylorMade SLDR / M1 / M2 / R15 adapter that is replaceable. The shaft itself is designed specifically for the following TaylorMade Driver models: SLDR, M1, M2, M3, M4, and R15 launched in 2016 and 2017.
The ProLaunch shaft weighs 1 pound. This item is delivered at a custom-specific assembly.
Fujikura Vista Pro 60 R-Flex Shaft – Best As A Ready-To-Use Product!
This enables golfers not to worry about the logo moving around when adjusting the adapter settings. The Fujikura Vista Pro 60 driver shaft fits perfectly TaylorMade Tips (adaptors at option – M1, M2, M3, M4). The manufacturers guarantee high-quality workmanship. They are ready to provide customization of the shaft in terms of the length or a grip type to meet the needs of individual golf players.
New Matrix Ozik White Tie MFS X5 55 – Best For The Design!
In regard to the design, it is black-colored but there is a white tie on the shaft giving it a stylish contrasting look. The Matrix Ozik MFS X5 is delivered with a 335 tip pre-installed.
Project X New HZRDUS Smoke Black 6.0 Shaft – The Best For The Price & Quality Correlation!
It is characterized by the following dimensions: 7 x 5 x 48 inches. The size of the shaft tip is .355. Needs the installation of an adapter tip on the shaft one. The Project X New HZRDUS model is a shaft of 3.5* of torque.
The Buyer’s Guide
What characteristics should I pay attention to when choosing a driver shaft?
There are two major factors one should consider. These are length and flex.
- A proper length is important since not only a golfer should feel comfortable with it but also because the shaft is not supposed to overload the swing. Increasing the distance is good but one should watch whether the accuracy is not affected.
- A proper flex depends on the speed of a golfer’s swing. The faster it is, the less flexible the driver shaft is expected to be. Hitting a ball further is the desire of any golfer. However, if they neglect their swing speed and chose the wrong flex, they will not demonstrate the best results in the play.
What types of flex should I choose?
The distance, accuracy, and trajectory of your golf shot depend directly on the type of your shaft flex. There are five types distinguished:
- Extra stiff (X) shafts are aimed for quite long hitters, approximately 300 off the tee. A too stiff shaft may lead to the loss of control over the ball.
- The stiff (S) shafts suit those who drive the ball mostly for more than 250 yards off the tee. Useful for mid-low handicaps and jerky swings.
- Regular flex (R) shafts are often preferred by those who drive the ball from 230 to 250 yards off the tee. Suit perfectly for high-handicap male golfers.
- Senior flex (A) shafts may work out best for the golfers who hit the ball less than for 180 yards.
- Ladies (L) flex shafts, being the softest type, may be ideal for women whose club speed is much lower than males’. A proper choice for those golfers who hit the ball, in general, less than 200 yards off the tee.
So the type of shaft flex should be chosen based on an individual player’s style of gaming. To make the right choice, a golfer should first analyze the distance of their most common shots.
Video Tutorial: Custom Fit Golf Shafts – HZRDUS
All in all, there’s a wide choice of effective driver shafts to make a golfer performance greater. They all have certain preferrable purposes of use. With the rightly chosen driver shift, golf players can increase the distance of their shots, improve their accuracy, adjust the trajectory, and affect the swing. We have selected the five best, in our opinion, options that may work out well for golf players of different categories with, respectively, diverse playing needs. Their strong and weak sides have been described in the review to draw your attention to the most significant issues, We hope you find this review useful, and pretty soon, you will make your perfect choice of a driver shaft with its help.