Choose the Best Shaft for M2 Driver
Customer’s Choice: the Best Rated Shafts for M2 Driver
385 users answered this survey. Please help us improve this review!
Are you having problems with your golf game? You may be actively looking for a lower ball flight. You may also want to find a driver that gives you less spin to control. If this is the case, what you need is very likely a new kind of shaft. Once you find it, your M2 driver will take on a new level of efficiency.You don’t need to be a golf pro to want to upgrade your game. If the biggest issue you face is always losing distance due to your ball being too far elevated, now is the time to act. The shafts on this present list will help keep your ball trajectory low. This will enable each swing to cut through wind resistance.
Table of Contents
Aldila Rogue Silver 60 Graphite Wood Shaft
The model comes with a total length of 46 inches. The flex is stiff in order to give you much more accurate traction as you make your swing. The main concern behind the creation of this new shaft model is to keep the trajectory of your ball as low as possible. This will cut through resistance from wind and low elevation.
At a total weight of 60 grams, this is a handy, lightweight, and very portable new shaft. But don’t be fooled into thinking it can’t get a ball out of its own way. The total level of torque available with this new shaft is a very impressive 3.4. This is a figure that few other models can hope to match, much less exceed.
One of the biggest advantages that comes with this model is its ability to keep ball spin as low as possible. This is a major plus when you are trying to land your ball in a specific area without a lot of wind interference. The level of torque that the shaft will generate is also kept to a reasonable level in order to stave off overkill.
The shaft itself is made of graphite with a tip size of .335 inches. This will give you the grip and traction you need to really get your ball moving. Best of all, it will give you the full level of control that you need to aim your swing with a high level of accuracy. If you value precision, this is the shaft to consider buying.
There really aren’t a lot of cons to mention with this particular model. One of them may perhaps the fact that it does tend to be a bit on the pricy side. If you can afford a top level shaft that gives you state of the art accuracy, this is the one to get. If it isn’t in your budget, there are others on this list for you to consider.
Project X HZRDUS Yellow 65 Graphite Wood Shaft
The reason for this is as clear as it is simple. This handy new model contains a host of great features that are well worth getting to know. It’s a low spin shaft that has been fully back weighted. It comes with a straight, gently tapered middle section. This is the best shaft for reducing both your spin and launch rates.
Its wood construction and careful weighting makes it perfect for players who want to expand their total playing length. It’s also great for affording you quick access to a higher level of head weight. These are measures that are highly recommended if you want to increase the average distance of each shot that you make with this shaft.
At a total weight of 63 grams, this is one of the more lightweight models on our list. However, it will give you plenty of heft for your money. It has been designed to produce a low to medium level ball launch with the smallest possible amount of spin. This is a shaft that will give you the launch velocity and precision you require.
One potential drawback is that the shaft has been engineered with stronger, more resilient players in mind. This is all to your advantage if you have a greater level of control at your disposal. However, this may not be the ideal shaft for players who lack a high level of physical strength. Other shafts on this list may be appropriate.
MRC Fubuki ZT 70 Shaft X-Flex + Callaway OptiFit Tip
If you really want to upgrade the precision, length, and overall quality of your golf swing, this handy new shaft will surely help you do so. It has been designed by experts in the shaft industry. The goal has been to create a unit that will give you a smooth, long swing with next to no spin and plenty of competent length and distance.
You may find that the slightly higher balance point is something that you need to get used to. You may not notice it right off the bat but it definitely does play a factor. The shaft has been well balanced to be smoothly proportioned. Neither the head nor the butt end is heavier than it needs to be. This will lengthen your swing considerably.
The buyer should note that there are several variations of this new model being offered by the maker. This means that you will need to be sure that the model you are ordering is the one you want. Be very careful when ordering. Your best bet is to pay close attention to the model number and specs so you don’t order the wrong type.
Fujikura Speeder Evolution Tour SPEC 757 7.1 Driver Shaft
The shaft comes with a wide range of great features. These include a specially customized Golf Pride Tour Velvet 360 grip that will give you a whole new level of grip. The best part is that although your swing will become looser, you won’t have to worry about finding a lack of torque to drive the ball forward.
You can also choose your flex and driver adapter from a number of included options. This handy feature allows you to customize your grip and fit while also giving you more control over a number of variables. If distance and wind resistance are issues, this handy new shaft gives you plenty of weapons to let you overcome them.
One possible drawback that some buyers have taken notice of is a tendency for some variations of this model to get a bit pricy. However, if you count up all of the major pros that you will have access to, this should not be an issue. It’s up to you to choose the exact model that will give you the best value for the money you spend.
Mitsubishi Kuro Kage Black Dual Core TINI Driver Shafts
The new model features high impact, long lasting Dual-Core Titanium Nickel wire. This will give users a far wider range of shot making options. The titanium nickel wire is perfect for acing shots by minimizing wind resistance and other inhibiting factors.
There aren’t a great many cons to take notice of with this handy new model. However, you do need to have a bit of caution when ordering. The model is now available in your choice of 40 gram and 50 gram models. This is a factor that will need to be kept in mind so that you can be sure to order the one that is right for your personal needs.
When it comes to raising your level of accuracy, you should never have to sacrifice impact. These new models are able to you the best of both worlds. Your best bet when buying a new shaft is to find one that combines superior handling with expert level wind resistance. The models on this list will help you achieve this goal.
When it comes to driving balls straight down the fairway in a long, smooth motion, the right new shaft will make it happen. It needs to be precision tested by golf shaft experts to ensure a high level of consistency and quality. It should be priced at a cost effective level to be affordable to hobbyists as well as seasoned fairway pros.
Reengineering is Key
Readers should try to find a model that has been reengineered in the recent past. This radical new redesign results in a longer, smoother, and more precise swing. As a result, the new model excels in areas where many of its peers tend to fail. Both club head and ball speed have been enhanced to guarantee a faster, farther swing.
You also want to find a shaft that is built strongly enough to handle with precision without being too heavy. There’s a happy medium that you need to find in order to maximize your personal comfort. Finally, the cost of the shaft should also be a factor. We’ve tried to list shafts here that are as cost effective as possible.
The average price for an M2 driver can range between $100 and $300. We have tried to present on this list only the most cost effective models. These are the ones whose features are truly worth the price.
Size and Weight
The average size for an M2 driver will range between 46 x 4 x 4 inches to 50 x 6 x 7 inches. The average weight for this type of driver will usually be about a pound. It will be up to you to test the driver in order to make sure that its precise size and weight are appropriate to your personal needs.
Interesting Video: Regular or Stiff Flex Shafts
The shafts on this list are the best new models for your M2 driver. All of the models on this list have been subjected to strict and rigorous tests. This is to make sure that they are worthy of your time, attention, and money. These are the ones to buy if you really want to give your game of golf a much needed lift.